Water Heater Components
How much do you know about your tank water heater? It’s an appliance that you use every day, but rarely think about. Hot showers, hand washing, laundry and dirty dishes all require the use of your hot water heater. Try counting how many times you turn on the hot water daily. The number might surprise you. It’s the second biggest expense on utility bills, accounting for around 18% of the monthly average in U.S. homes.
There are two kinds of tank-model water heater systems: gas and electric. Both water heating units look alike on the outside, save for the chimney running through the middle of the gas version. Understanding how they work and their basic components will help with future maintenance and repair issues. Below is a list of water heater essentials. Get acquainted with the basics and save yourself both time and money.
Water Heater Tank – The metal tank is the inner shell of a water heater. It contains a protective liner that holds from 40 to 60 gallons of hot water. This translates to around 50 to 100 pounds per square inch (PSI), within the pressure range of a typical residential water system. The tank is covered on the outside by an insulating material (like polyurethane foam) and then covered again by a decorative outer shell.
Dip Tube – The water enters the tank through the dip tube (at the top of the tank) then travel to the bottom where it is heated.
Shut-off Valve – This component stops the water flow into the tank. This separate piece is located outside and above the unit.
Heat-out Pipe (Water Discharge) – This pipe is suspended down into the tank, carrying the hot water into the home.
Thermostat – A more accurate term is a thermometer, but it is also a temperature-control device. Certain electric units have a separate thermometer for each element.
Heating Mechanism – This is where the two units differ. An electric unit has an internal element inside the tank to heat the water. Gas units have a burner and chimney system.
Drain Valve – This is a component exclusively for a gas unit. The drain valve is located near the bottom of the tank and used primarily to empty the tank of sediment.
Pressure Relief Valve – A safety device that is connected to an overflow pipe running down the outside of the tank. It helps keep the temperature and pressure inside the tank within safe limits.
Anode Rod – This component, made of magnesium or aluminum with a steel core, keeps the interior of the tank from corroding.
Print this page out or make some notes – and then keep the list next to your water heater. And if you ever need water heater repair, maintenance or installation, call the experts at Pacific Air today! Contact us at (253) 292-3995.